Phoenix Appliance Air Conditioning Heating Repair and Service
Phoenix Plumbing Repair Services

Home > Water and Gas Leak Repairs Phoenix

If you have water or gas leak in your house or business, or you are experiencing any other problems just call our toll free number to get professional help. We can take care of your water or gas leak problem any time. Call us anytime to schedule an appointment for your Phoenix water or gas leak repair. We will work with you to set up a repair appointment for a time that is most convenient for you.


Or you can send us your water or gas leak repair appointment request via email. Please include in your name, phone number, zip code and a very brief description of your water or gas leak problem. We will contact you as soon as we receive the email to confirm your Phoenix water or gas leak repair appointment.

Our water or gas leak repair service areas include entire Phoenix and the surrounding cities:

Gold Camp


Apache Junction

Black Canyon
Casa Grande
view the rest service areas

The information below is to help you get more familiar with water or gas leak, which describes ways you can prevent from water or gas leak in more effective and efficient ways. These tips can also help you save money on your utility bills and future water or gas leak repairs. They also may help extend the ongoing efficiency of your water or gas systems.
SAFETY WARNING: WATER OR GAS LEAKS CAN BE EXTREMELY DANGEROUS TO REPAIR WITHOUT EXPERIENCE AND KNOWLEDGE. Taking chances with your health and safety when there is an water or gas leak problem is not worth it. We strongly suggest that you do not get involved with any water or gas leak repairs without professional help. All water or gas leak repairs require professional training, knowledge and experience.  Without this professional background, repairs can be very harmful.  Water or gas leak technicians use tools that are specialized for water, electric and gas systems. For professional service, call our water or gas leak repair service 24/7 at:


The water that enters your house begins as rain and reaches you via either a well or, for most homes, a municipal water supply system. It comes into the building under a pressure of between 60 and 100 pounds per square inch and immediately passes a main shutoff valve and then a water meter (if you are being charged for your water consumption). The entrance pipe is usually 3/4 inch or 1 inch in diameter. Once inside the house it becomes the cold water main, which is normally 3/4 inch in diameter. For the short run across your basement ceiling, the cold water main travels alone. Then it reaches the house water heating device, which it feeds into with a 3/4-inch branch line. The hot water main is a 3/4-inch pipe that begins at the house heater and continues throughout the house to each of the fixtures in the building. In nearly every instance you will find the hot and cold water lines running parallel to each other. When the pipes run vertically for a distance of at least one floor, they are known as risers. The smaller pipes that lead away from the main lines to supply each fixture are known as branch lines. Throughout the water supply system you will discover a myriad of valves, which show themselves as fittings with wheels or handles attached to them. Most are globe valves, and they operate like any globe-type faucet. They have packing nuts and packing, or packing washers, and stem washers at the bottom of their threaded stems. The reason you will spend very little time having to repair a leak in the valves is that for most of their lifetime they are left open, so their working parts do not have much opportunity to become worn. Then again, they may be left unused for so long that they become corroded and locked in their open position, which is annoying when that one time you want to close them comes around and you have to put a wrench on the handle before you can turn it. It should be noted that some valves, particularly the gate valve, which is often used as the main shutoff valve at the house service entrance, can take a long, long time to close. Gate valves are designed so that when they are open, the wedge at the bottom of the stem is completely retracted from the flow of water through the valve body. This makes them less resistant to water flow. Consequently, when you begin turning its handle you have a long thread to close before the gate is completely shut. Don't give up. Keep turning until the handle will not rotate anymore. At that point you can be sure that no water is flowing through the pipe.

For professional help call us 24/7 at